Stair Runner Installation Tips

Stair runners are narrow strips of carpeting which are set on pads and attached to tackles strips nailed to each thread. Carpeted runners are elegant additions to a beautifully designed home. When you have a staircase inside the house, a carpeted runner helps add texture and color to the overall décor. Stair runner installation is an easy job and something you can do by yourself over the weekend. You must read up and learn as much as you can about the installation process so that you don’t end up making a mess of the entire thing. Yes, it is easy to goof up if the instructions are not carefully followed! So be careful. In this article we highlight a few tips on how to successfully install stair runners in your home.

Measure The Staircase

A runner should be installed centered between the balusters and the skirt board of the staircase. That’s not the same thing as placing the runner on the center of the plank – if you do so, the runner will seem to be off-center. To get the markings right, measure accurately. Find the center of the stair by measuring the distance between the baluster and skirt board and subtract it from the width of the runner. Divide the resulting figure by two. That’s the amount of gap to be taped off on either side of the runner.  

Choose Material Carefully        

The stair runner should be a thin yet dense pad that softens the sound of footsteps. It is important that you choose the material for the runner carefully, more so because it’s going to be a permanent installation. Choose a fabric that is easy to clean and maintain. Preferably select a polypropylene material as it is more durable than cotton. You can also choose woolen fabric, though it would be difficult to wash and clean.

Choose The Print Carefully       

Since you are installing an interior stair runner, choose the runner’s print carefully. You can go for bold prints if you don’t necessarily use the staircase for sitting and chatting. But be careful not to settle for large prints that spoil the overall décor of the house. When it comes to matters of colors, choose something that complements your house. If the staircase is not seen from other corners of the house, you can choose a bright color. But if it’s right on everyone’s way, it’s better to go for slightly lighter shades. 

Buy Anti-Slip Stair Nosing - 

High Quality Rug Pad    

Don’t show your meaner side when buying the rug pad. Get a quality rug pad that runs for many years. A mesh or waffle weave will wear off quickly. Look for a carpet store that measures and cuts the rug pad to fit each thread. This makes the job slightly easy for you.

Securing the Pad             

Take special note of this point. Stair runners are most vulnerable to wear along the nose of threads hence you need to wrap the nose with the pad. While securing the material over the pad, make sure that the prints are symmetrically laid over all the nose of the threads in the same order. For example, the middle of a diamond printed material should fall on every bend over the nose. Maintain the symmetry throughout.  

Staple Carefully           

Finally, once you have laid the rug pad and the material securely, staple carefully and fastidiously. The more staples you put, the tighter will the runner sit on the step. 

Stair runner installation is one of the essential home décor necessities. And the best part is you can do it without professional help. Try it today and make the stairs look brand new!